Description
SKF Electronic Stethoscope TMST-3
The SKF Electronic Stethoscope TMST-3 is a high quality, sensitive instrument enabling the determination of troublesome machine parts by the detection of machine noises or vibrations. TMST 3 includes a headset, two different length probes, 70 and 300 mm (2.8 and 11.8 in.), and a pre recorded audio CD demonstrating the most common encountered troublesome machine noise, all supplied complete in a sturdy carrying case.
SKF Electronic Stethoscope TMST-2 has been replaced by TMST-3
Features & benefits
- Excellent sound quality helps to reliably identify the possible cause of the noise
- User friendly and easy to operate, no special training required
- Lightweight ergonomic design makes it easy to operate with one hand
- Excellent quality headset for optimum sound quality even in very high-noise environments
- Pre-recorded demonstration CD and output for analogue recording help facilitate analysis and comparison
- Supplied with two probes, 70 and 300 mm (2.8 and 11.8 in.) long
- Adjustable digital volume control up to 32 levels to reach desired volume
Technical Data
| Designation | TMST 3 |
|---|---|
| Frequency range | 30 Hz-15kHz |
| Operating temperature | – 10 to + 45 °C (14-113 °F) |
| Output volume | Adjustable in 32 levels |
| Led indicator | Power on |
| Sound volume | |
| Battery low | |
| Maximum recorder output | 250 mV |
| Headset | 48 Ohm (with ear defender) |
| Auto switch off | Yes, after 2 min |
| Battery | 4 x AAA/R03 (included) |
| Battery lifetime | 30 hours (continuous use) |
| Dimensions handset | 220 x 40 x 40 mm (8.6 x 1.6 x 1.6 in.) |
| Probe length | 70 and 300 mm (2.8 and 11.8 in.) |
| Weight | |
| – Total | 1,6 kg (3.5 lb) |
| – Instrument | 162 g (0.35 lb) |
| – Headset | 250 g (0.55 lb) |
Spare Parts
| Designation | Description |
|---|---|
| TMST 3-1 | Handset |
| TMST 3-3 | Probe set |
| TMST 2-2A | Headset, for serial number 201706XXXX and below |
| TMST 3-HEADSET | Headset, for serial number 201707XXXX and above |
| TMST 3-CB | Toolcase with inlay for TMST 3 |
