Permatex Blue RTV Silicone Gasket Maker

Description

Features

• OEM specified.
• Superior adhesion and flexibility
• Sensor safe
• Replaces most cut gaskets
• Can be used as a gasket maker or dressing
• Easy application
• Non-flammable, Non-toxic

Suggested Application(s)

• Automobile – Valve covers, oil pans, timing covers, water pumps, and thermostat housings.
• Marine – Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings

Instruction

1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake and Parts Cleaner.
2. Cut nozzle to desired bead size – gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
5. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

Technical

• Chemical Type: Acetoxy silicone rubber
• Appearance: Blue non-sag paste
• Odor: Mild acetic acid
• Specific Gravity: 1.3
• Extrusion rate @ 25_C, (grams/min): 350
• Flash Point °C (°F): >93 (>200)